Latest Oracle 1z0-1066-24 First Attempt, Exam real Dumps Updated [Mar-2025]
Get the superior quality 1z0-1066-24 Dumps Questions from TrainingQuiz. Nobody can stop you from getting to your dreams now. Your bright future is just a click away!
NEW QUESTION # 13
When creating a new replenishment plan, what are the required plan options?
- A. Segment Group. Inventory Policies. Policy Assignment Set
- B. Segment Group. Segments. Inventory Policies. Policy Assignment Set
- C. Segment Group. Segments. Policy Assignment Set
- D. Segment Group. Segments. Inventory Policies
Answer: C
NEW QUESTION # 14
Which statement fully describes the contents and purpose of the Product Lifecycle Management (PLM) page layout?
- A. The PLM layout has two tables: one to define and manage launch dates for new products, and another for entering forecast adjustments.
- B. The PLM layout has one table to define and manage discontinuation dates, and another table for entering forecast percent changes.
- C. The PLM layout has a single table to define and manage launch dates, and also enter any forecast adjustments.
- D. The PLM layout has one table to define and manage launch and discontinuation dates, and another for entering forecast adjustments.
Answer: D
Explanation:
The Product Lifecycle Management (PLM) layout consists of two tables: one to manage product launch and discontinuation dates and another to adjust forecasts accordingly. This structure supports managing the entire product lifecycle, as outlined in Oracle's documentation on PLM processes in supply chain planning
NEW QUESTION # 15
When running the Publish Order Forecast scheduled process, what is the minimum set of parameters needed to publish additional measures such as requisition and purchase order data?
- A. Include requisitions in the order forecast, "Include purchase orders in the order forecast", and "Publish purchasing details"
- B. Include requisitions in the order forecast, "Include purchase orders in the order forecast", and "Publish order details"
- C. Publish order details
- D. Include purchase orders in the order forecast
Answer: B
Explanation:
To include requisition and purchase order data in the forecast, you need to select parameters for both requisitions and purchase orders, along with the option to publish order details. This ensures that all relevant order data is communicated to suppliers through the forecast, as detailed in Oracle's guidelines for publishing order forecasts
NEW QUESTION # 16
When running the Publish Order Forecast scheduled process, what is the minimum set of parameters needed to publish additional measures such as requisition and purchase order data?
- A. Include requisitions in the order forecast, "Include purchase orders in the order forecast", and "Publish purchasing details"
- B. Include requisitions in the order forecast, "Include purchase orders in the order forecast", and "Publish order details"
- C. Publish order details
- D. Include purchase orders in the order forecast
Answer: B
Explanation:
To include requisition and purchase order data in the forecast, you need to select parameters for both requisitions and purchase orders, along with the option to publish order details. This ensures that all relevant order data is communicated to suppliers through the forecast, as detailed in Oracle's guidelines for publishing order forecasts
.
NEW QUESTION # 17
Which three steps are required so that a supply plan can use different service-level percentages for different groupings of items when calculating safety stock?
- A. Execute segmentation.
- B. Create a safety stock policy assignment set.
- C. Assign the percentage on the Safety Stock tab of plan options.
- D. Create a supply planning policy assignment set.
- E. Create segment groups.
Answer: A,D,E
Explanation:
To implement varied service levels for different item groups, first create a supply planning policy assignment set, which defines rules for assigning items to specific safety stock policies. Next, create segment groups that align items with these policies based on their characteristics. Finally, execute segmentation, which categorizes items according to the specified segments. By following these steps, you can apply different service levels to distinct item groups during safety stock calculations, as outlined in Oracle's supply planning documentation
.
NEW QUESTION # 18
A global company is subject to differing regulations regarding hazardous materials in a product. Version 1 of the product can be sold in North America and Europe. Version 2 of the product can only be sold in Europe.
Which sequence of setups could help a planner ensure that supply is available in a timely fashion per these constraints?
- A. Create an attribute-based netting rule using region and version; map the rule to collectible attributes; associate the rule to a supply plan; run the plan.
- B. Define segment groups based on region and version; execute segmentation; map the segmentation results to an attribute-based netting rule; associate the rule to a supply plan; run the plan.
- C. Define region and version as planning attributes; create an attribute-based netting rule using region and version; associate the rule to a supply plan; run the plan.
- D. Define region and version as planning attributes; map them to collectible attributes; create an attribute-based netting rule using region and version; associate the rule to a supply plan; run the plan.
Answer: B
NEW QUESTION # 19
Which statement applies only to the planning of back-to-back items and not standard items?
- A. Planning collects bookings or shipments history to forecast items.
- B. Planning pegs reserved supplies to sales orders.
- C. Must have added sourcing rules to the Global Order Promising assignment set.
- D. Must use Global Order Promising and Supply Chain Orchestration to release and create new supplies
- E. Planning analyzes supply shortages and capacity overloads using any of the standard planning tools.
Answer: D
Explanation:
NEW QUESTION # 20
Segmentation was last run many months ago and the replenishment planner is concerned about losing track of items whose policies get changed due to the upcoming resegmentation. There are also a lot of manually assigned segments that must be preserved. Which two approaches for Execute Segmentation should you use in this planner?
- A. No other setting is needed.
- B. Auto-approve segmentation changes should not be selected.
- C. Save the last segmentation result should be selected.
- D. Retain segment overrides should be selected.
Answer: C,D
Explanation:
To maintain manual overrides and track items through segmentation changes, select both "Save the last segmentation result" to archive the current segmentation configuration and "Retain segment overrides" to preserve manually assigned segments. These options prevent data loss during the resegmentation process
NEW QUESTION # 21
The marketing department of a company needs to analyze the forecast based on type of demand (large retailer versus specialty store) and item cost (low versus high).
After creating a segment group with demand class and product for segment granularity, what additional sequence of actions must they also perform to satisfy marketing?
- A. Define four segmentation based on demand type and item cost, define each segment's criteria, execute segmentation, configure planning analytics to update the dimension catalog, and use the selector tool to create a new table or graph.
- B. Define four segments based on demand type and item cost, execute segmentation, and use the selector tool to create a new table or graph.
- C. Define two segments based on demand type and item cost, execute segmentation, and use the selector tool to create a new table or graph.
- D. Define four segments based on demand type and item cost, define each segment's criteria, execute segmentation, and use the selector tool to create a new table or graph.
Answer: D
NEW QUESTION # 22
Should value in Adjusted Shipments Forecast measure always be equal to the Final Shipments Forecast measure?
- A. Yes,if the adjustment is made at the same aggregation level at which itis viewed, or below.
- B. No, both measures will always be different.
- C. Yes,if the demand plan hasn't been run again after adjustment.
- D. Yes, if the adjustment is made below the aggregation level at which it is viewed.
- E. Yes,if the demand plan is approved and values are locked.
Answer: A
NEW QUESTION # 23
Planners are complaining about getting too many exception messages, some of which have minima value for evaluating plan health.
Which three solutions could reduce message clutter? (Choose three.)
- A. Go to Configure Exception Sets, duplicate the currently used exception set, remove the undesired messages from the duplicate set. then assign the duplicate set to all plans.
- B. Go to Configure Exception Sets, and for the currently used exception set. specify a threshold for various messages.
- C. Go to Configure Exceptions, and specify a threshold for various messages.
- D. Go to Configure Exception Sets, create a new set with only the messages the planners care about, and then, set all supply plans to use this new exception set.
Answer: A,B,D
NEW QUESTION # 24
You've decided to opt into the Customer Demand Collaboration feature. Which three statements describe what that enables?
- A. You can post to the portal your statistical forecast for the products you sell them so they can see your forecast for them.
- B. The information they share with you is informational and only available to you in the portal.
- C. A customer can use B2B messaging to share their expected needs and historical consumption for the products you sell them.
- D. A customer can log in to a portal and manually enter their expected needs for the products you sell them.
Answer: A,C,D
Explanation:
Enabling the Customer Demand Collaboration feature allows customers to share demand data through B2B messaging or by manually entering it via a portal. Additionally, it supports sharing your forecasts with them, enabling a collaborative planning approach that enhances demand visibility and aligns expectations MY ORACLE SUPPORT
NEW QUESTION # 25
Your customer has seasonal demand and wants to generate forecast for next six months. You ran a demand plan for first time using six months of shipments history but the forecast accuracy was low.
Identify two statements that are true in this scenario. (Choose two.)
- A. Running a demand plan with both shipments and booking forecast profile is required to forecast seasonal demand.
- B. Running a demand plan with both shipments and seasonal shipments forecast profile is required to forecast seasonal demand.
- C. Running a demand plan with 18 to 36 months of shipments history is recommended.
- D. Running a demand plan with less than one year of history will impact seasonal analysis.
- E. Running a demand plan with six months of booking history instead of six months of shipment history is required for seasonal demand.
Answer: C,E
NEW QUESTION # 26
Which is the correct sequence of possible solutions that a constrained plan might consider when attempting to resolve a capacity or resource overload?
- A. First alternate item structures, and work definitions, then substitute components, then alternate resources, and finally, alternate suppliers and source organizations.
- B. First alternate suppliers, then alternate resources, then substitute components, then alternate work definitions and item structures, and finally, alternate source organizations.
- C. First alternate resources, then substitute components, then alternate work definitions and item structures, and finally, alternate suppliers and source organizations.
- D. First subscribe components, then alternate resources, then alternate work definitions and item structures, and finally, alternate suppliers and source organizations.
Answer: C
NEW QUESTION # 27
You just ran a Data Collection and want to confirm that certain data was successfully collected. Identify three collected data sets that can be viewed on the Maintain Supply Network Model Page. (Choose three.)
- A. Safety Stock and Subinventories
- B. Supplier Site and Service Level
- C. Calendar and Master Organization
- D. Customer Location and Carriers
- E. Customers and Customer Sites
Answer: B,C,D
NEW QUESTION # 28
Your client has made a change to item costs. What type of collection do they need to run to only pick up this change?
- A. Run net change collection for item costs.
- B. Item costs cannot be updated via a data collection processes.
- C. Must run full data collection. It is not possible to update just item costs.
- D. Run targeted collection for item costs.
- E. Item costs is automatically updated. No data collection is necessary.
Answer: D
NEW QUESTION # 29
Your client wants to utilize product categories on sourcing rules. They have created a new category for this and populated the items for it.
Where do they set up the category planning uses when evaluating sourcing rules?
- A. Manage Plans
- B. Manage Sourcing Rules
- C. Manage Planning Profile Options
- D. Manage Planning Source Systems
- E. Manage Assignment Sets
Answer: E
NEW QUESTION # 30
Which list of parameters is available for selection when you run the Start Backlog Planning scheduled process?
- A. Demand Priority Rule. Organization. Demand Class. Item. Customer
- B. Priority Rule. Organization. Demand Class, Item. Customer
- C. Backlog Priority Rule. Organization. Category. Item. Customer
- D. Demand Priority Rule. Organization. Category. Item, Customer
Answer: D
NEW QUESTION # 31
You have executed Planning Data Collection and want to confirm that data has successfully been collected. Identify the three data combinations that can be viewed using the Maintain Supply Network Model Page. (Choose three.)
- A. Safety Stock and Subinventories
- B. Supplier Site and Service Level
- C. Calendar and Master Organization
- D. Customer Location and Carriers
- E. Sales Channel and Demand Class
Answer: B,C,D
NEW QUESTION # 32
Which option outlines changes you can make to a simulation plan when evaluating demand and supply?
- A. Change item specification values, change item lead times, create mass changes for items
- B. Add demands, cancel demands, reschedule demands, add supply, cancel supply, reschedule supplies
- C. Change item specification values, change item lead times, change item-organization specification values
- D. Add demands, cancel demands, reschedule demands, add new planned orders, reschedule supplies
- E. Change item specification values, change item lead times, create mass changes for items all at once, change item-organization specification values
Answer: B
NEW QUESTION # 33
You have run a plan for your organization and there were sales orders that have been set up for drop shipment that you cannot see in the plan.
Which two options explain why the sales orders cannot be seen in the plan? (Choose two.)
- A. Drop Ship Demand Class has not be set up.
- B. Planning Profile 'Enable Planning for Drop Shipments' has not been set to 'Yes'.
- C. Drop Ship Item Validation Org has not been set up.
- D. Supplier not configured in Manage Planning Source Systems
- E. Include drop ship demands and supplies flag has not been checked on your plan options.
Answer: A,D
NEW QUESTION # 34
......
Guaranteed Success with Valid Oracle 1z0-1066-24 Dumps: https://pass4sure.trainingquiz.com/1z0-1066-24-training-materials.html
